1000 Watt BMC Brushless Electric BIKE Motor Upgrade Kit

Exclusive 1000w BMC brushless bike motor, and crystalyte controller package is the ultimate upgrade for your electric bike. We are the only company who has this kit available. This is the upgrade you have always dreamed about. 1000 watts of brushless power, torque & top speed. Imagine you flying down the streets, and zooming up hills. All you need to do is bolt this 1000 watt brushless conversion kit on (especially on older Currie electric bikes)! It is designed to run at 36 volts, 48 volts, or even 72 volts for some serious power. This kit can also be run at 24 volts. The Motor is a BMC 1000w, and the controller is a 24v-72v, 35-55/60 Amp controller. The controller has adjustable current (amperage) & voltage. Our 1000w kit can directly bolt on to your Currie Bike, Lashout Bike, or Synergy Electric Bike. It can also be used on many other applications, such as all USPD Pro Drive Kits by Currie Tech, and Most 3 Bolt Pattern settings. The Shaft on the BMC Motor is an 8mm D-Shaft.

It is also one of our best performing motor/controller kit for robot builders, electric powered vehicles, and any other concept vehicle/idea or machine you want to build.

The kit includes a 1000w Brushless Motor, an extremely heavy duty external crystalyte controller.. This upgrade works best with a 36v-48v power supply. SLA 12 Volt batteries work extremely well, and lithium also works well. We have tested this kit out at 48 Volts on a Currie E-Ride Mountain Bike & it pushes 30+ MPH. No other bolt on motor can produce speeds like this. If you want to go all the way, use lithium batteries and your experience will be incredible. You will also reduce the weight of the project, scooter or bike by up to 35lbs!

Extremely limited quantities available.

Call with any questions! Additional parts, such as batteries, 36v & 48v chargers, & throttle assemblies are available. This motor kit will not work with any DIRECT DRIVE Scooters(e1000,i1000,s1000). This kit will NOT work with most of the Ezip electric bike line. Ezip electric bicycles do not have compatiblility with our kit at this time. This kit does work perfectly with older Currie Electric Bikes & USPD Kits.

This kit combines a custom made brushless motor with a custom 3 phase external controller . The external controller provides 35-55 Amps at 24-72 Volts.

Features:

Reversible 1000w BMC Brushless Motor w/ 8mm "D" shaft(CW or CCW rotation)

Cystalyte 24v-72 Volt 35-55 Amp Controller

Pre-wired to connect motor and controller together with ease.

Master On/Off switch on Controller

Key Locks on controller

Adjustable Voltage Cutoff

Adjustable to Clockwise(CW) or Counter Clockwise(CCW) Rotation (Alternate Phase wires)

Controller Dimensions: Length 7"| Width 3.25" | Height 2.25"

Motor Dimensions: Case Height 3.25"| Diameter Approx 5"

Motor Shaft: 8mm "D" Shaft

Optional Accessories:

SLA or Lithium Power Source (24 Volt, 36 Volt, 48 Volt, 72 Volt)

SD200 Thumb Type Potentiometer Throttle

48 Volt Charger

36 Volt Charger

Below your will find several optional add-ons for your 1000w Brushless Bike Upgrade Kit.