This is Currie Tech's 650 Watt BRUSH Motor with Throttle & Controller for your Currie, Izip, Ezip, GT, Schwinn or Mongoose Electric Scooter.
This 650 Watt Brush Motor kit comes with an external controller & throttle. You cannot properly upgrade without using the provided controller, so make sure to use the one supplied with the motor. The controller will fit right in place of your old Controller, and the motor will bolt perfectly in place of your old motor.
This 650w motor is a powerful four brush permanent magnet electric motor design with 100% ball bearing construction. 15 tooth freewheeling sprocket for #25 chain. Shaft rotation spins CCW if you are facing the shaft. 25" long power leads with connector at end. 3 bolt mounting bracket measures 3-7/8" center to center distance between holes. Dimensions: 4"(H) x 4"(W) x 5"(L) including shaft. Weight 6 lbs. It is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's polarity (power wires). Comes with a standard three hole mounting face plate that is used by most high powered Currie Tech scooters.
We run this motor at 24 volts & 36 volt for some serious performance! When you run our 650w motor at 36 volts you increase the wattage to 900 volts or more. This increase in wattage equals, a major increase in torque and top end. Our stock scooter with this motor at 36 volt goes 24 MPH! Some of our customers have experienced significant performance increases when using this motor versus their 750w brush motor at 36 volts.
650w Kit Features:
650 Watt Brush Motor
24 Volt 5pin Controller Included, upgradable to 36 Volt
24 Volt 5 Pin Twist Throttle Included
Voltage: 24 VDC or 36VDC
Rated Speed: 2600R/Min
Rated Current: 36A
Output: 650W (900 watts @ 36 volt 25amps)
Sprocket: #25 Chain 11 Tooth
650 Watt Rare Earth Magnet Motor
Dramatically increase low end torque
Increase in Top Speed
Does NOT use more battery power